Choose from transparent PVC-film, tinted PVC-film and Screen net. If installation takes place at low temperatures, we recommend to use heat blower from our online store to warm elements for better tensioning.
Transparent PVC-film
Tinted PVC-film
Screen net
Choose a color for the window’s reinforced border. The standard width of the window’s border is 5 cm.
White
Black
Gray
Brown
Beige
cm
inches
Window opening's FREE width (internal size)
Window opening's left side FREE height (as viewed from outside)
Window opening's right side FREE height (as viewed from outside)
Door width
Distance between two zippers
Distance from left edge of opening to the door
Distance from left edge of window's opening to the left zipper as viewed from outside.
The most recommended mounting type for top edge is either mounting by turn buttons or screws. If the mounting surface for the edge of the tarp is perpendicular to the window opening's plane, choose hooks mounting. Velcro mounting is recommended for the window openings not wider than 2 meters.
Self-tapping screws
Turn buttons
Hooks
Velcro mounting
The most recommended mounting type for side edges is either mounting by turn buttons or screws. If the mounting surface for the edge of the tarp is perpendicular to the window opening's plane, choose hooks mounting. Velcro mounting is recommended for the window openings not wider than 2 meters.
If the element ends at the floor and it is not possible to use other types of mounting, then a weight pouch is needed at the bottom edge. If element contains a zipper door, weight pouch is the only option for bottom edge.
Weight pouch
The rolled-up window is hung along the upper edge with hanging straps. The recommendation is 1 hanging strap for every meter of roll length. For example, if your window is 1 meter wide, take 2 straps to secure both sides of the roll. If you are not going to roll the window at all, you do not need to add straps to your order.
I have carefully reviewed all the drawing details and confirm that the drawings are correct.
Generate drawing
Update drawing
Open drawings
I have carefully reviewed all the drawing details and confirm that the drawings are correct. on vaadittu tieto.
VAT is valid.
Validoidaan ALV:tä. Odota hetki…
Do you want to make changes to the drawing? Let us know!
If you want to make changes to the generated drawing, describe them with text. For example, indicate dimensions and the location of corner cuts if necessary. Explain how you want to position the eyelets if the standard placement does not suit you for some reason. If you want to combine different colored edges in the same element, mention this in the comment as well.